Control of tsetse and trypanosomiasis transmission in Uganda by applications of lambda-cyhalothrin

The pyrethroid insecticide lambda-cyhalothrin was evaluated in field trials against Glossina f.fuscipes and sleeping sickness transmission in Iyolwa sub-county, Tororo District, Uganda. The insecticide was applied selectively to the resting-sites of tsetse, by bush-spraying, using 10% wettable powder (10WP) formulation at an application rate of 11.6 g a.i./ha over an area of 28 km2, or by a 2% Electrodyn formulation (2ED) applied at 0.9 g a.i./ha over 30 km2. In a third trial area of 32 km2, 215 pyramidal traps treated with lambda-cyhalothrin 100 mg/m2 were set. The best impact was obtained with 10WP lambda-cyhalothrin which eliminated tsetse within 1-2 months, whereas G.f.fuscipes persisted at very low density in part of the area treated with 2ED lambda-cyhalothrin. In both treated areas the numbers of human sleeping sickness cases fell to no more than one per month, compared with four to twelve per month previously. The overall rate of cattle trypanosomiasis (T.brucei and T.vivax) was also reduced slightly. Insecticide-treated traps remained fully effective for at least 6 months under field conditions and catches were reduced 20-90-fold. These results in the control of tsetse and trypanosomiasis transmission lead us to recommend lambda-cyhalothrin for tsetse control operations.     

Conservation of two predator species for biological control ofChrysophtharta bimaculata (Col.: Chrysomelidae) in tasmanian forests

Chrysophtharta bimaculata (Olivier) (Coleoptera: Chrysomelidae) is a major defoliator of regeneration eucalypt trees in Tasmania causing a significant reduction in height and diameter increment of trees which reduces wood volume per hectare. A study to conserve and enhance the efficiency of coccinellid species chieflyCleobora mellyi (Mulsant) (Coleoptera: Coccinellidae), and the cantharid,Chauliognathus pulchellus (Macleay) (Coleoptera: Cantharidae), for the biological control ofC. bimaculata was conducted in young regeneration forests in southern Tasmania from 1991–92. Cantharid adults and coccinellid adults and larvae feed onC. bimaculata eggs and, to a lesser extent, young larvae. The study found that coccinellids were more active throughout the egg and early (1^st and 2^nd) stage ofC. bimaculata. The cantharid, however was active only during the egg stage of the prey and then disappeared from the plantation. The coccinellids were therefore the most useful predators, but their population declined when the prey reached the 3^rd and 4^th stages. As shortage of food may account for this decline, supplementary food was provided in the form of sucrose sprays or sugar granules at a feeding station. This resulted in the retention of both predators and particularly the coccinellids and enhanced their efficacy.     

Alginate embedding and subsequent sporulation of in vitro-produced Conidiobolus thromboides hyphae using a pressurised air-extrusion method

Conidiobolus thromboides is an entomophthoralean fungus with potential as a biological control agent of aphids. However, its application in biological control is limited due to its formulation requirements. The objective of this study was to develop and optimise a novel air-extrusion method to embed C. thromboides hyphae at high density in alginate pellets. An orthogonal experimental design was used to investigate selected combinations of parameters known to affect hyphal density within pellets. The diameter of pellets produced, and the calculated density of hyphae within them, ranged from 0.18 ± 0.09 to 3.17 ± 0.06 mm and from 0.02 to 350.56 mg/mm³ respectively. These data were used to predict the optimal parameter combination to deliver the greatest density of hyphae of C. thromboides per pellet: 1% sodium alginate, a 1:2 ratio of hyphae to sodium alginate, an orifice diameter of 0.232 mm and an air pressure of 0.05 MPa. Pellets made under the optimal conditions predicted produced a mean total of 4.3 ± 0.6 × 10⁵ conidia per pellet at 100% relative humidity which was significantly greater than the mean total number of conidia produced from infected aphid cadavers of comparable size (9.35 ± 0.85 × 10⁴) (p < 0.001). In conclusion, air-extrusion embedding appears to be a promising method for formulating in vitro-produced hyphae of C. thromboides for use in biological control.     

Pollination disruption by European honeybees in the Australian bird-pollinated shrubGrevillea barklyana (Proteaceae)

European honeybees (Apis mellifera) were less efficient pollinators ofGrevillea barklyana than nectar-feeding birds. Nectar-collecting honeybees did not contact reproductive parts of flowers. Pollen-collecting honeybees preferentially visited malestage flowers but rarely visited female-stage flowers. Fruit set on caged inflorescences that allowed access to honeybees but excluded birds was reduced by more than 50% compared to inflorescences that were visited by both types of visitors. Further, fruit set on caged inflorescences was less than on bagged inflorescences that excluded both birds and honeybees, indicating that pollen removal by bees decreased opportunities for delayed autonomous selfing in the absence of birds. Although fruit set was not pollen-limited at the study site, pollen removal by honeybees would decrease fruit set in small populations where birds are scarce. In addition, pollen removal by honeybees would reduce opportunities for outcrossing and reproductive success through male function. Although honeybees have been in Australia for insufficient time to have exerted selection on floral traits, evolutionary shifts in response to these animals are likely to occur in the future.     

Responses of production and storage walnut pests to Bacillus thuringiensis insecticidal crystal protein fragments

Recent advances in genetic engineering have provided the opportunity to induce walnut plants to produce Bacillus thuringiensis Berliner insecticidal crystal protein fragments (ICPFs) for insect control. We studied the effects of two ICPFs CryIA(b) and CrylA(c) previously shown to be encoded by the cryIA(b) and cryIA(c) genes in the B. thuringiensis strains HD-1 and HD-73, respectively. The lethal effects on larvae of codling moth, Cydia pomonella (L.), navel orangeworm, Amyelois transitella (Walker), and the major postharvest pest Indianmeal moth, Plodia interpunctella (Hübner), were investigated. Both proteins were toxic to the three species tested. Indianmeal moth larvae were the most susceptible and navel orangeworm the least; CryIA(b) was generally more toxic to navel orangeworm. Similar relationships resulted when ICPFs were incorporated into the diet. Both ICPFs caused decreased rate of development of navel orangeworm. Effects on pupal weight occurred only at the highest concentration (100 ng/cm²). Neither ICPF affected frequency of mating or fecundity. In addition to the lethal effects, the extended development times observed could have considerable effects on the population dynamics of the navel orangeworm and possibly other species.     

Climate change effects on behavioral and physiological ecology of predator–prey interactions: Implications for conservation biological control

Habitat management under the auspices of conservation biological control is a widely used approach to foster conditions that ensure a diversity of predator species can persist spatially and temporally within agricultural landscapes in order to control their prey (pest) species. However, an emerging new factor, global climate change, has the potential to disrupt existing conservation biological control programs. Climate change may alter abiotic conditions such as temperature, precipitation, humidity and wind that in turn could alter the life-cycle timing of predator and prey species and the behavioral nature and strength of their interactions. Anticipating how climate change will affect predator and prey communities represents an important research challenge. We present a conceptual framework—the habitat domain concept—that is useful for understanding contingencies in the nature of predator diversity effects on prey based on predator and prey spatial movement in their habitat. We illustrate how this framework can be used to forecast whether biological control by predators will become more effective or become disrupted due to changing climate. We discuss how changes in predator–prey interactions are contingent on the tolerances of predators and prey species to changing abiotic conditions as determined by the degree of local adaptation and phenotypic plasticity exhibited by species populations. We conclude by discussing research approaches that are needed to help adjust conservation biological control management to deal with a climate future.     

Control of the haematophagous fly Hippobosca maculata, a serious pest of equines, by deltamethrin

Abstract. This study reports the results of both a small-scale and a large-scale field treatment to assess control of the haematophagous fly Hippobosca maculata Leach a serious pest of equines in a stud in India using a deltamethrin based formulation, Butox^®. In the small-scale field trial application of 2 litres of deltamethrin at 0.001-0.003% concentration gave 90–100% control over 30 days. At 0.004% and 0.005% concentrations complete control was recorded for 45 and 90 days respectively. Mass application of 2 litres of 0.005% deltamethrin to equines and bovines controlled infestations of H.maculata for 1 year.     

Exploring novel objective functions for simulating muscle coactivation in the neck

Musculoskeletal modeling allows for analysis of individual muscles in various situations. However, current techniques to realistically simulate muscle response when significant amounts of intentional coactivation is required are inadequate. This would include stiffening the neck or spine through muscle coactivation in preparation for perturbations or impacts. Muscle coactivation has been modeled previously in the neck and spine using optimization techniques that seek to maximize the joint stiffness by maximizing total muscle activation or muscle force. These approaches have not sought to replicate human response, but rather to explore the possible effects of active muscle. Coactivation remains a challenging feature to include in musculoskeletal models, and may be improved by extracting optimization objective functions from experimental data. However, the components of such an objective function must be known before fitting to experimental data. This study explores the effect of components in several objective functions, in order to recommend components to be used for fitting to experimental data. Four novel approaches to modeling coactivation through optimization techniques are presented, two of which produce greater levels of stiffness than previous techniques. Simulations were performed using OpenSim and MATLAB cooperatively. Results show that maximizing the moment generated by a particular muscle appears analogous to maximizing joint stiffness. The approach of optimizing for maximum moment generated by individual muscles may be a good candidate for developing objective functions that accurately simulate muscle coactivation in complex joints. This new approach will be the focus of future studies with human subjects.